VEGA VEGAPULS series 60 Electronics module (≥ 2.0.0 - ≤ 3.8) User Manual
Page 12
Advertising
5 Pull the previous electronics out by holding the opening
levers.
6 Insert the new oscillator carefully.
7 Insert the two hold screws and tighten them
8 Connect the connection cables according to the operating
instructions manual of the respective sensor
9 Screw the housing cover back on
The electronics exchange is now finished.
As a rule, the exchange of the electronics must be
documented internally when used in Ex applications.
12
Electronics module - VEGAPULS series 60
Mount
30176
-EN
-070220
Advertising