VEGA VEGASON 65 Profibus PA - Manual (Page 42)

Necessary components:
l VEGASON 65
l PC with PACTware and suitable VEGA DTM
l VEGACONNECT
l Power supply unit or processing system
7.2 Parameter adjustment with PACTware
Further setup steps are described in the operating instructions manual
"
DTM Collection/PACTware" attached to each CD and which can also
be downloaded from our homepage. A detailed description is available
in the online help of PACTware and the VEGA DTMs.
Note:
Keep in mind that for setup of VEGASON 65, DTM-Collection in the
actual version must be used.
All currently available VEGA DTMs are provided in the DTM Collection
on CD and can be obtained from the responsible VEGA agency for a
token fee. This CD includes also the up-to-date PACTware version.
The basic version of this DTM Collection incl. PACTware is also
available as a free-of-charge download from the Internet.
Go via www.vega.com and "Downloads" to the item "Software".
7.3 Parameter adjustment with PDM
For VEGA sensors, instrument descriptions for the adjustment
program PDM are available as EDD. The instrument descriptions are
already implemented in the current version of PDM. For older versions
of PDM, a free-of-charge download is available via Internet.
Go via www.vega.com and "Downloads" to the item "Software".
7.4 Saving the parameter adjustment data
It is recommended to document or save the parameter adjustment
data. They are hence available for multiple use or service purposes.
The VEGA DTM Collection and PACTware in the licensed, profes-
sional version provide suitable tools for systematic project documen-
tation and storage.
42 VEGASON 65 • Profibus PA
7 Setup with PACTware and other adjustment programs
28788
-EN
-081127