VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) standpipe ver. 4 … 20 mA_HART four-wire User Manual
Page 29
Menu item
Reset value
L
ighting
no reset
L
anguage
no reset
SIL
no reset
HART
mode
no reset
Factory setting
L
ike basic adjustment, furthermore special parameters are reset to
default values.
2)
Pointer
T
he min. and max. distance values are reset to the actual value.
A
dditional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
2)
S
pecial parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
VEGAPULS
66
standpipe version • 4 … 20 mA/HART four-wire
29
6 S
et up with the indicating and adjustment module PLICSCOM
28742
-EN
-090305