VEGA VEGAPULS 62 (≥ 2.0.0 - ≤ 3.8) Profibus PA - Manual (Page 58)

Gas phase Temperature 1 bar/14.5 psig 10 bar/145 psig 50 bar/725 psig
Air/Nitrogen 20 °C/68 °F 0.00 % 0.22 % 1.2 %
Air/Nitrogen 200 °C/392 °F 0.00 % 0.13 % 0.74 %
Hydrogen 20 °C/68 °F -0.01 % 0.10 % 0.61 %
Hydrogen 200 °C/392 °F -0.02 % 0.05 % 0.37 %
Water (saturated
steam) 100 °C/212 °F 0.20 % - -
Water (saturated
steam) 180 °C/356 °F - 2.1 % -
Ambient conditions
Ambient, storage and transport temperature -40 … +80 °C (-40 … +176 °F)
Process conditions
Process temperature (measured on the process fitting), depending on seal and antenna system
-
FKM (Viton) -40 … +130 °C (-40 … +266 °F)
-
FFKM (Kalrez 6375) -20 … +130 °C (-4 … +266 °F)
-
FKM (Viton) with temperature adapter -40 … +200 °C (-40 … +392 °F)
-
FFKM (Kalrez 6375) with temperature
adapter -20 … +200 °C (-4 … +392 °F)
-
FFKM (Kalrez 2035, 6230) (FDA) -15 … +130 °C (+5 … +266 °F)
-
FFKM (Kalrez 2035, 6230) (FDA) with
temperature adapter -15 … +200 °C (+5 … +392 °F)
-
FKM (Viton) with impedance cone PP -40 … +80 °C (-40 … +176 °F)
-
FFKM (Kalrez 6375) with impedance
cone PP -15 … +80 °C (+5 … +176 °F)
For the vessel pressure, you also have to note the specifications on the type label. Always the
lowest value is applicable.
Vessel pressure - horn antenna -1 … 40 bar/-100 … 4000 kPa (-14.5 … 580 psi)
Vessel pressure - parabolic antenna -1 … 6 bar/-100 … 6000 kPa (-14.5 … 870 psi)
Vessel pressure relating to the flange nom-
inal stage see supplementary instructions manual "Flanges
according to DIN-EN-ASME-JIS"
Vibration resistance 9)
-
Horn antenna mechanical vibrations with 4 g and 5 … 100 Hz
-
Parabolic antenna mechanical vibrations with 1 g and 5 … 100 Hz
Data on rinsing air connection
Pressure < 6 bar (87.02 psi)
Air quantity see diagram
9) Tested according to the regulations of German Lloyd, GL directive 2.
58 VEGAPULS 62 • Profibus PA
10 Supplement
28445
-EN
-090305