VEGA VEGAPULS 68 (≥ 2.0.0 - ≤ 3.8) Profibus PA - Manual (Page 42)

l Sensor address
l PIN
Copy sensor data
Copy sensor data?
Basic adjustment
If the "Reset" is carried out, the sensor resets the values of the
following functions to the reset values (see chart):
3)
Function Reset value
Sensor address 126
Max. adjustment 0 m(d)
Min. adjustment Meas. range end in m(d) 4)
Medium Bulk solid
Vessel form not known
Damping 0 s
Linearisation linear
Channel PV lin. %
Sensor-TAG Sensor
Displayed value PA-Out
Extended settings None
Additional PA value Secondary Value 1 %
Out-Scale-Unit %
PV-Out-Scale 0.00 lin-% = 0.0 %
100.0 lin-% = 100 %
Unit of measurement m(d)
The values of the following functions are not reset to the reset values
(see chart) with "Reset":
Function Reset value
Sensor address no reset
Language no reset
Factory setting
Like basic adjustment, furthermore special parameters are reset to
default values.
5)
3) Sensor-specific basic adjustment.
4) Depending on the sensor type, see chapter "Technical data".
5) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Reset
42 VEGAPULS 68 • Profibus PA
6 Set up with the indicating and adjustment module PLICSCOM
29263
-EN
-090305