VEGA VEGACAL series 60 - Manual (Page 7)

Electronics module CL-E.60F. is suitable for VEGACAL - Foundation
Fieldbus FF.
Electronics module CL-E.60X. suitable for VEGACAL - with signal
conditioning instrument.
Caution:
In Ex applications only one instrument and one electronics module with
respective Ex approval may be used. Check the specifications on the
type label.
4 .3 Mounting steps
The electronics module is located in the electronics compartment. The
below illustrations show the respective position of the electronics
compartment in a single or double chamber housing.
1
Fig. 1: Single chamber housing
1 Position of the electronics module
1
Fig. 2: Double chamber housing
1 Position of the electronics module
Proceed as follows:
1 Switch off power supply
2 Unscrew housing cover of the electronics compartment
3 Disconnect the connection cables according to the operating
instructions manual of the respective sensor
Mounting steps
Electronics module • VEGACAL series 60 7
4 Mounting
30531
-
EN
-110411