VEGA VEGACAL series 60 User Manual
Page 8
Advertising
4
Loosen the two holding screws with a screwdriver (Torx size T 10
or Phillips size 4)
2
1
Fig. 3: Loosening the holding screws
1
Electronics module
2
Screws (2 pcs.)
5
Pull the previous electronics out by holding the opening levers.
6
Insert the new electronics module carefully.
7
Insert the two hold screws and tighten them
8
Connect the connection cables according to the operating
instructions manual of the respective sensor
9
Screw the housing cover on
The electronics exchange is now finished.
As a rule, an exchange of electronics must be documented internally
when Ex applications are involved.
8
Electronics module • VEGACAL series 60
4 Mounting
30531
-EN
-110411
Advertising