VEGA VEGABAR 63 Foundation Fieldbus - Manual (Page 54)

Input variable
Adjustment
Adjustment range of the min./max. adjustment relating to the nominal measuring range:
-
Min. -5 … +95 %
-
Max. -5 … +105 %
Adjustment range of the zero/span adjustment relating to the nominal measuring range:
-
zero -5 … +95 %
-
Span -5 … +105 %
Recommended max. turn down 10 : 1 (no limitation)
Nominal measuring ranges and overload resistance
Nominal range Overload, max. pressure Overload, min. pressure
Gauge pressure
0 … 0.4 bar/0 … 40 kPa 2 bar/200 kPa -1 bar/-100 kPa
0 … 1.6 bar/0 … 160 kPa 10 bar/1000 kPa -1 bar/-100 kPa
0 … 16 bar/0 … 1.6 MPa 80 bar/8 MPa -1 bar/-100 kPa
0 … 40 bar/0 … 4 MPa 80 bar/8 MPa -1 bar/-100 kPa
0 … 100 bar/0 … 10 MPa 200 bar/20 MPa -1 bar/-100 kPa
0 … 250 bar/0 … 25 MPa 500 bar/50 MPa -1 bar/-100 kPa
0 … 600 bar/0 … 60 MPa 1200 bar/120 MPa -1 bar/-100 kPa
-1 … 3 bar/-100 … 300 kPa 17 bar/1700 kPa -1 bar/-100 kPa
-1 … 5 bar/-100 … 500 kPa 35 bar/3500 kPa -1 bar/-100 kPa
-1 … 15 bar/-100 … 1.5 MPa 80 bar/8 MPa -1 bar/-100 kPa
Absolute pressure
0 … 0.4 bar/0 … 40 kPa 2 bar/200 kPa 0 bar abs.
0 … 1.6 bar/0 … 160 kPa 10 bar/1000 kPa 0 bar abs.
0 … 6 bar/0 … 600 kPa 35 bar/3500 kPa 0 bar abs.
0 … 16 bar/0 … 1.6 MPa 80 bar/8 MPa 0 bar abs.
Reference conditions and actuating variables (similar to DIN EN 60770-1)
Reference conditions according to DIN EN 61298-1
-
Temperature + 18 … +30 °C (+64 … +86 °F)
-
Relative humidity 45 … 75 %
-
Air pressure 860 … 1060 mbar/86 … 106 kPa (12.5 … 15.4 psig)
Determination of characteristics Limit point adjustment according to IEC 61298-2
Characteristics linear
Reference installation position upright, diaphragm points downward
Influence of the installation position depending on the isolating diaphragm version
54 VEGABAR 63 • Foundation Fieldbus
10 Supplement
32464
-EN
-081209