VEGA VEGAFLEX series 60 - External housing - Manual (Page 11)

3
1
2
Fig. 3: Place the securing strap to the sensor housing and tighten it
1
Securing strap
2 Locking screw
3 Hexagon nut of the plug
5 Remove the protective cover on the plug connector of the
instrument housing.
6 Insert the plug (straight plug or angle plug) of the HF
connection cable on the instrument housing and hand-
screw the hexagon nut.
7 Tighten the hexagon nut of the plug with the fork wrench
(SW 19) with max. 3 Nm (2.212 lbf ft).
The electrical connection of the electronics module is
described in the operating instructions manual of the sensor.
VEGAFLEX - External housing 11
Connect the sensor to the external housing
34106
-
EN
-080227