VEGA VEGAFLEX series 60 - External housing - Manual (Page 7)

4 M ounting
4 .1 General instructions
In the following cases, we recommend using an instrument
version with external housing:
l
if the standard housing is too big
l
if strong vibrations can damage the electronics
In Ex applications, only a housing with appropriate Ex approval
must be used.
4 .2 Mounting preparations
The following tools are required for mounting the external
housing:
l
Allen key size 4
l
Fork wrench, wrench size 19
We recommend using further material when mounting the wall
mounting plate.
l
4 screws, depending on the mounting surface
4 .3 Mounting steps - instrument housing
1 Mark the holes according to the following drilling template
2 Depending on the mounting surface, fasten the wall
mounting plate with 4 screws
Tools
Mounting material
Wall mounting
VEGAFLEX - External housing 7
Mounting
34106
-
EN
-080227