VEGA VEGAFLEX 65 Profibus PA - Manual (Page 43)

L
0
-2 mm (-0.079 ")
2 mm (0.079 ")
10 mm (0.394 ")
5 mm (0.197 ")
-5 mm (-0.197 ")
0,15 m (5.906 " )
0,1 m (3.937 " ) 0,15 m
(5.906 ")
0,1 m
(3.937 ")
1 1
Fig. 18: Deviation VEGAFLEX 65 in coax version in oil
1 Dead zone - no measurement possible in this area
L Probe length
Influence of the ambient temperature to the sensor electronics
Temperature drift 0.03 %/10 K relating to the max. measuring range
or max. 0.3 %
Temperature drift - Digital output 3 mm/10 K relating to the max. measuring range or
max. 10 mm
Ambient conditions
Ambient, storage and transport temperature -40 … +80 °C (-40 … +176 °F)
Process conditions
Process pressure -1 … +40 bar/-100 … +4000 kPa (-
-14.5 … +580 psig), depending on the process
fitting
Process temperature (thread or flange tem-
perature)
-
FKM (Viton) -40 … +150 °C (-40 … +302 °F)
-
EPDM -40 … +150 °C (-40 … +302 °F)
-
FFKM (Kalrez 6375) -20 … +150 °C (-4 … +302 °F)
The measurement error from the process condi-
tions is in the specified pressure and temperature
range of below 1 %.
VEGAFLEX 65 • Profibus PA 43
10 Supplement
31847
-
EN
-120329