VEGA PLICSRADIO R62 Wireless processing unit - Manual (Page 10)

10
3 Product description
PLICSRADIO C62 • Wireless processing unit for PLICSRADIO T62
32627-EN-130701
superordinate control system. The statuses of the switching inputs are
transferred to the integrated relays.
On instruments with one of the optionally available interfaces (RS232/
Ethernet), the measured values can be retrieved via modem or
network and displayed through a web browser. A measured value and
message transmission is also possible via e-mail/SMS.
Wide-range power supply unit with 20 … 253 V AC/DC for world-wide
use.
Detailed information about the power supply can be found in chapter
"Technical data".
3.3 Adjustment
The instrument can be adjusted with the following adjustment media:
•
With integrated display and adjustment unit
•
an adjustment software according to FDT/DTM standard, e.g.
PACTware and a Windows PC
The entered parameters are generally saved in PLICSRADIO C62,
when used with PACTware and PC also optionally in the PC.
Information:
When using PACTware and the corresponding VEGA DTM, additional
settings can be carried out which are not possible or only partly pos-
sible with the integrated display and adjustment unit. When using an
adjustment software, you either need one of the integrated interfaces
(RS232/Ethernet) or the interface converter VEGACONNECT.
Further instructions for setting up the web server and e-mail functions
can be found in the online help of PACTware or the PLICSRADIO C62
DTMs as well as the operating instructions manual "RS232/Ethernet
connection".
3.4 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out under consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Voltage supply
Packaging
Transport
Transport inspection