VEGA PLICSRADIO R61 Wireless indicating unit - Manual (Page 11)

11
4 Mounting
PLICSRADIO D61 • Wireless indicating unit (single channel)
32626-EN-130228
Effective range Mounting height 2.4 GHz Mounting height 920 MHz
500 m (1640 ft) 3.9 m (12.79 ft) 6.4 m (20.99 ft)
750 m (2460 ft) 4.8 m (15.74 ft) 7.8 m (25.59 ft)
1000 m (3280 ft) 5.6 m (18.37 ft) 9.1 m (29.85 ft)
1500 m (4921 ft) - 11 m (36.08 ft)
Mount PLICSRADIO at the minimum height from the ground, or from
the highest obstacle that touches the Fresnel zone, as indicated in
the table; use a mast if necessary. With the 2.4 GHz standard model,
an optional external antenna with a 3 meter cable is available to allow
mounting at the required height.
Use the recommended cables (see chapter "Connecting to power
supply") and tighten the cable gland.
You can give your instrument additional protection against moisture
penetration by leading the connection cable downward in front of the
cable entry. Rain and condensation water can thus drain off. This ap-
plies mainly to outdoor mounting as well as installation in areas where
high humidity is expected (e.g. through cleaning processes) or on
cooled or heated vessels.
Fig. 5: Measures against moisture penetration
4.2 Mounting steps
The PLICSRADIO D61 for wall mounting is supplied with a mounting
base for screw mounting.
→
Fasten the instrument with four appropriate screws (not included
in the delivery) according to the following illustration.
Moisture
Wall mounting