VEGA PLICSRADIO R61 Wireless indicating unit - Manual (Page 9)

9
3 Product description
PLICSRADIO D61 • Wireless indicating unit (single channel)
32626-EN-130228
Two types of power supply unit are available. You can find detailed
information on the power supply in chapter "Technical data" in the
"Supplement".
3.3 Operation
The parameter adjustment of PLICSRADIO D61 is carried out via the
integrated display and adjustment module PLICSCOM. The parame-
ters of the radio communication and the measured value presentation
can be set. Adjustment of a sensor connected to PLICSRADIO T61/
T62 is not possible.
3.4 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
following ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out under consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 … 85 %
Voltage supply
Packaging
Transport
Transport inspection
Storage
Storage and transport
temperature