VEGA PLICSMOBILE GSM_GPRS radio module - Manual (Page 18)

Fig. 8: Input of the e-mail access data
For measured value transmission via SMS, no furterh access data are
required because all specifications are already available via the mobile
phone contract.
For the configuration, only the URL or the IP address of the WEB-VV
server are required. When the hosting is made via VEGA, then the
server is contacted via the URL: "web-vv.vega.com". If WEB-VV is
hosted in your company, then you will get the URL from the IT
department.
The setup of PLICSMOBILE and sensor is carried out via USB and
a PC with PACTware and corresponding DTM. With a SIM card with
activated CSD service, access via the radio link is also possible
(remote parameter adjustment). Keep in mind that this is carried out
via a dial-in connection, which bases invoicing on connection time.
Considerable connection costs can be incurred depending on the
duration of use.
SMS transmission
WEB-VV
Remote parameter ad-
justment (Dial-In)
18 PLICSMOBILE • GSM/GPRS radio module
5 Set up
36849
-EN
-111221