VEGA VEGAFLEX 86 Modbus and Levelmaster protocol User Manual
Page 4
Advertising
4
Quick start
VEGAFLEX 86 • Modbus and Levelmaster protocol
41848-EN-130314
other distances, for example, 10 % and 90 % is also possible. Starting
point for these distance specifications is always the seal surface of
the thread or flange.
1. In the menu "Additional settings", menu item "Damping" you can
adjust the requested damping of the output signal.
2. Select the parameter of the current output and the output charac-
teristics in the menu item "Current output".
You can find additional information in chapter "Parameter adjustment".
Further steps
Advertising