VEGA VEGAFLEX series 80 Centering - Manual (Page 16)

16
2 Mounting
Centering • for VEGAFLEX series 80
44967-EN-131119
1
4
2
1
4
2
Fig. 13: Mounting the spacer (K3 or M1, M2) on the gravity weight (S1, S2)
1 Gravity weight (S1, S2)
2 Spacer - Plastic (K3) for tube inside diameter ≤ 100 mm (4")
3 Spacers - Metal (M1, M2)
4 Retaining ring
1. Measure the diameter of the standpipe or bypass tube and adapt
the spacer (2) accordingly. The notches on the 4-arm spacer (2)
allow simple trimming down to tube diameters DN 50 (2") and
DN 80 (3").
For cutting, use a metal saw or a pair of strong pincers or side
cutters.
With spacers of metal (3), you have to use a spacer that fits.
2. Plug the spacer (2 or 3) onto the short neck of the gravity weight
(1)
3. Slide a retaining ring (4) onto the short neck of the gravity weight
(1)