VEGA VEGAFLEX series 80 Centering User Manual
Page 6
6
1 Product description
Centering • for VEGAFLEX series 80
44967-EN-131119
ø 12 mm
(0.47"
)
ø 12 mm
(0.47"
)
M3
M4
Fig. 4: Spacers of metal for rod versions with ø 12 mm (0.47 in)
M3 Spacer of stainless steel (AISI 631) for rods with ø 12 mm (0.47 in) - outer ø 49.2 up to 56.3 mm (1.9 up to
2.2 in)
M4 Spacer of stainless steel (AISI 631) for rods with ø 12 mm (0.47 in) - outer ø 66.6 up to 84.9 mm (2.6 up to
3.3 in)
Centering weights are fastened to the end of the cable probe, thus
straining the cable of the probe by means of their own weight.
The metallic centering weights are suitable for use with cable versions
in standpipes or bypass tubes.
Select the centering weight according to the tube inside diameter.
For use in turbulent environments and in extremely tilted positions, the
centering weights with ø 40 and 45 mm (1.57, 1.77 in) are available
with 90 mm/3.54 in height (instead of 30 mm/1.18 in) and correspond-
ingly greater weight.
You can find out which centering weight is suitable for a particular
measuring probe in the table at the end of this chapter.
Centering weights