VEGA VEGABAR 82 4 … 20 mA - Operating Instructions - Manual (Page 36)

36
6 Set up with the display and adjustment module
VEGABAR 82 • 4 … 20 mA
45027-EN-131010
Caution:
With active PIN, adjustment via PACTware/DTM as well as other
systems is also blocked.
You can change the PIN number under "Additional adjustments -
PIN".
This menu item enables the setting of the requested national lan-
guage.
The following languages are available:
•
German
•
English
•
French
•
Spanish
•
Russian
•
Italian
•
Dutch
•
Portuguese
•
Polish
•
Czech
•
Turkish
In the delivery status, the sensor is set to the ordered national lan-
guage.
In this menu item you can define the indication of the measured
values on the display.
The default setting for the display value is "Lin. percent".
The display and adjustment module has a backlight for the display.
In this menu item you switch on the lighting. You can find the required
operating voltage in chapter "Technical data".
The lighting is switched off in delivery status.
Display - Language
Display - Displayed value
1 and 2
Display - Backlight