VEGA VEGASWING 66 - Relay - Manual (Page 25)

25
7 Maintenance and fault rectification
VEGASWING 66 • - Relay
43756-EN-130322
You find all information to the electronics exchange in the operating
instructions of the new electronics module.
In general, all electronics modules of series SG60HT can be inter-
changed. If you want to use an electronics module with a different
signal output, you must carry out the complete setup. You can find
the necessary, corresponding operating instructions manual on our
homepage.
7.4 Instrument repair
If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) from our Internet homepage
www.vega.com under: "Downloads - Forms and certificates - Repair
form".
By doing this you help us carry out the repair quickly and without hav-
ing to call back for needed information.
•
Print and fill out one form per instrument
•
Clean the instrument and pack it damage-proof
•
Attach the completed form and, if need be, also a safety data
sheet outside on the packaging
•
Please ask the agency serving you for the address of your return
shipment. You can find the respective contact data on our website
www.vega.com under: "Company - VEGA worldwide"