7 setup with pactware, 1 connect the pc, 7setup with pactware – VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) 4 … 20 mA_HART four-wire Approval according to LPR radio standard User Manual
Page 48: 1 connect the pc 3 1 2
Advertising
7
Setup with PACTware
7
.1 Connect the PC
3
1
2
Fig. 27: Connection of the PC directly to the sensor via the interface adapter
1
USB cable to the PC
2
Interface adapter VEGACONNECT 4
3
Sensor
Information:
The interface adapter VEGACONNECT 3 or additional previous
versions are not suitable for connection to the sensor.
1
5
2
4
3
OPEN
TWIST
USB
LO
CK
Fig. 28: Connecting the PC via HART to the signal cable
1
VEGAPULS 61
2
HART resistance 250 Ω (optional depending on processing)
3
Connection cable with 2 mm pins and terminals
4
Processing system/PLC/Voltage supply
Via the interface adapter
directly on the sensor
Connection via HART
48
VEGAPULS
61 • Approval according to LPR radio standard
7 Setup with PACTware
41714
-EN
-120301
Advertising