VEGA VEGABAR 82 HART and accumulator pack - Operating Instructions - Manual (Page 11)

11
3 Product description
VEGABAR 82 • HART and accumulator pack
45029-EN-131107
1
2
3
4
5
Fig. 5: Front-flush installation of the CERTEC ® measuring cell with double seal
1 Measuring cell
2 Seal for the measuring cell
3 Process fitting
4 Additional, front seal for measuring cell
5 Diaphragm
1
2
3
4
5
Fig. 6: Hygienic installation of the CERTEC ® measuring cell
1 Measuring cell
2 Form seal for the measuring cell
3 Gap-free seal for process fitting
4 Process fitting
5 Diaphragm
3.3 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
Front-flush mounting with
double seal
Installation in hygienic
fitting
Packaging
Transport