VEGA VEGABAR 87 HART and accumulator pack - Operating Instructions - Manual (Page 47)

47
10 Supplement
VEGABAR 87 • HART and accumulator pack
45045-EN-131107
10 Supplement
10.1 Technical data
Materials and weights
Materials, wetted parts
Process fitting
316L
Transmitter 316L
Suspension cable FEP
Seal, suspension cable FKM, FEP
Connection tube 316L
Diaphragm Hastelloy C276
Protective cap PFA
Seal for process fitting (in the scope of delivery)
Ʋ Thread G1½ (DIN 3852-A) Klingersil C-4400
Ʋ Threaded fitting Klingersil C-4400
Materials, non-wetted parts
Isolating liquid
Essomarcal (med. white oil, FDA-approved)
Straining clamp 1.4301
Threaded fitting 316L
Electronics housing Plastic PBT (polyester), Alu die-casting powder-coated,
316L
External housing plastic PBT (Polyester), 316L
Socket, wall mounting plate external
housing
plastic PBT (Polyester), 316L
Seal between base and wall mounting
plate
EPDM (fixed connected)
Seal, housing cover NBR (stainless steel housing), silicone (Alu/plastic hous-
ing)
Inspection window in housing cover for
display and adjustment module
Polycarbonate (UL-746-C listed)
Ground terminal 316Ti/316L
Connection cable between transmitter
and external electronics housing with
IP 68 (25 bar) version
PE, PUR
Type label support on connection cable PE hard
Connection cable with IP 68 (1 bar)
version
PE
Connection cable, master and slave
sensor
PE, PUR
Weights
Basic weight
0.7 kg (1.543 lbs)
Suspension cable 0.1 kg/m (0.07 lbs/ft)
Connection tube 1.5 kg/m (1 lbs/ft)