VEGA LUCOM EDGE router ER75i v2 SL USER’S GUIDE - Manual (Page 28)

EXPANSION PORT MOUNTING
28
3. Expansion port mounting
3.1. Expansion port mounting for ER75i v2
Attention! Expansion port PORT1 and PORT2 include when the router ER75i v2 SL
is switched off.
After removing front head of the box it is possible to take out the B-RB-v2
motherboard (position 1). The expansion port PORT1 (position 2) is connected to connector
J8 (see below) of the router B-RB-v2 motherboard (position 1) from TOP side. The
expansion port PORT2 (position 3) is connected to connector J3 (see below) of the router B-
RB-v2 motherboard (position 1) from TOP side. The expansion port is mounted to the
motherboard by the help of three spacers (position 10). After mounting the expansion port
the box is inserted motherboard into box and kneaded front head in the box.
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de