VEGA LUCOM EDGE router ER75i v2 SL USER’S GUIDE - Manual (Page 66)

CONFIGURATION
66
E-mail can be send from the Startup skript. This command is used to email
with following parameters.
•
-t receiver Email address
•
-s subject
•
-m message
•
-a appendix
•
-r number of attempts to send email (default set 2 attempts)
Example to send email
email –t [email protected] –s “subject“ –m “message“ –a c:\directory\abc.doc –r 5
6.20. SMS Configuration
In the SMS Configuration menu it is possible to select automatic sending of SMS
messages following power up (Send SMS on power up) and at the start (Send SMS on PPP
connect) or the loss (Send SMS on PPP disconnect) of the PPP connection and at data limit
exceeded (Send SMS when datalimit exceeded). With switch-on parameter Send SMS when
binary input on I/O port (BIN0) is active it is possible to define SMS for binary inputs
in window BIN0-SMS, which will be sent if this binary input is active. With switch-on
parameter Send SMS when binary input on expansion port (BIN1-BIN4) is active it is
possible to define SMS for each of four binary inputs in windows BIN1-SMS, BIN2-SMS,
BIN3-SMS and BIN4-SMS, which will be sent if those binary inputs are active. It is possible
to send information to three telephone numbers. Unit ID is the name of the router that it will
send an SMS message to. Unit ID may have a random form.
In the second part of the window it is possible to set function Enable remote control
via SMS. After this it is possible to establish and close PPP connection by SMS message.
This control can be configured for up to three numbers. If is set Enable remote control via
SMS, all incoming SMS are processed and deleted. In the default settings this parameter is
turned on.
If no phone number is filled in, then it is possible to restart the router with the help
of SMS in the form of Reboot from any phone number. While filling of one, two or three
numbers it is possible to control the router with the help of an SMS sent only from these
numbers. While filling of sign “*” it is possible ro control the router with the help of an SMS
sent from every numbers.
Control SMS message doesn’t change the router configuration. If the router is
switched to offline mode by the SMS message the router will be in this mode up to next
restart. This behaviour is the same for all control SMS messages.
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de