VEGA VEGAPULS 61 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA__HART two-wire - Manual (Page 14)

1
Fig. 5: Position of the polarisation plane with VEGAPULS 61 with encapsulated
antenna system
1 Marking hole
1
Fig. 6: Position of the polarisation plane with VEGAPULS 61 with plastic horn
antenna
1 Marking bars
M ake sure that all parts of the instrument exposed to the process, in
particular the sensor element, process seal and process fitting, are
suitable for the existing process conditions. These include above all
the process pressure, process temperature as well as the chemical
properties of the medium.
Y ou can find the specifications in chapter "Technical data" or on the
type label.
4 .2 Mounting preparations, mounting strap
T he optionally available mounting strap is used to fasten the radar
sensor over open vessels or flumes. It is suitable for mounting on
walls, ceilings or brackets. The strap is supplied unassembled and
Suitability for the pro-
cess conditions
14 VEGAPULS 61 • 4 … 20 mA/HART two-wire
4 M ounting
28434
-EN
-100426