VEGA VEGAPULS 61 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA__HART two-wire User Manual
Page 43
Advertising
Factory setting
L
ike basic adjustment, in addition, special parameters are reset to
default values.
2)
Pointer
T
he min. and max. distance values are reset to the actual value.
A
dditional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
2)
S
pecial parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
VEGAPULS
61 • 4 … 20
mA/HART two-wire
43
6 S
et up with the indicating and adjustment module PLICSCOM
28434
-EN
-100426
Advertising