VEGA VEGAPULS 61 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA__HART four-wire - Manual (Page 11)

3 .3 Operation
VEGAPULS 61 can be adjusted with different adjustment media:
l
with indicating and adjustment module
l
with the suitable VEGA DTM in conjunction with an adjustment
software according to the FDT/DTM standard, e.g. PACTware and
PC
l
with manufacturer-specific adjustment programs AMS™ or PDM
l W ith a HART handheld
3 .4 Packaging, transport and storage
Y our instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
according to DIN EN 24180.
T he packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE foil
is also used. Dispose of the packaging material via specialised
recycling companies.
T ransport must be carried out under consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
T he delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or
concealed defects must be appropriately dealt with.
U p to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
U nless otherwise indicated, the packages must be stored only under
the following conditions:
l N ot in the open
l D ry and dust free
l N ot exposed to corrosive media
l P rotected against solar radiation
l A voiding mechanical shock and vibration
l S torage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
l R
elative humidity 20 … 85 %
Packaging
Transport
Transport inspection
Storage
Storage and transport
temperature
VEGAPULS 61 • 4 … 20 mA/HART four-wire 11
3 P roduct description
28439
-EN
-100426