Velleman MML16MC - Manual (Page 3)

MML16MC
V. 01 – 14/11/2013 3 ©Velleman nv
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
4. Features
• display colour (text and graphics): red, green, blue, yellow, magenta, cyan, white
• brightness: full bright white colour 2100 cd/m², 4-level brightness control
• memory: 26 text pages of 210 characters, and 16 pages of graphics
• real-time clock: built-in real-time clock with backup battery
• 12/24 h format
• buzzer: built-in buzzer with programmable duration
• control: by 44-key IR remote control
by PC - cable included, USB to 3.5 mm stereo jack
• comes with: IR remote control, user manual, 2 mounting brackets, power adapter
5. Overview
Refer to the illustrations on page 2 of this manual.
6. Programming the board with the remote control
You can program the display with the included remote control or through your computer. See
"Programming the board with the computer software" for details.
First message
To type a message:
1. Connect the message board to a power supply using the included cable.
2. On the remote, press Q-PROG.
3. Type HELLO using the keys on the remote.
If you type a wrong character, press DEL to delete the last character.
4. Press ENTER.
The message appears on the display.
Display the time and date
1. Press TIME/DATE to display the time and date message only.
2. Press ESC to cancel time/date display function.
6.2 Alternate characters: lower case, digits and symbols
To display a lower case letter, a digit or a symbol, you need to change the keyboard mode + shift key.
The symbol on the display indicates what mode is currently active.
Uppercase White symbols on the keys (numbers, symbols)
Lowercase Green symbols on the keys (symbols)
1. Press Q-PROG.
2. Type one or more characters.
3. Press SHIFT.
The lower case mode is now active.
4. Type one or more characters.
5. Press SHIFT.
The numerical mode is now active.
6. Type one or more characters.
7. Press SHIFT.
The symbol mode is now active.