Velleman MML16MC - Manual (Page 6)

MML16MC
V. 01 – 14/11/2013 6 ©Velleman nv
14. Press ENTER.
The page will be displayed at the set times.
If you want to clear a schedule, you need to reset the device. See "Resetting the device" below.
7.5 Combining multiple pages
You can display multiple programmed pages in the order you want.
1. On the remote, press RUN-PAGE.
2. Type the pages you want to combine, for example BACD.
3. Press ENTER.
8. Message Board Settings
Device ID
If you want to control your device with the included software, you need to assign an ID to the device
first. You can do this with the software or with the remote. With the software, you can control multiple
message boards.
You can connect multiple boards to each other with a data cable (not included).
You can set the device ID as follows:
1. On the remote, press FUNCT.
2. Press ↓ to select SET ID.
3. Press ENTER.
4. Use ↑ or ↓ to set the device ID.
5. Press ENTER.
System Date and Time
You can set the date and time of the board as follows:
1. On the remote, press FUNCT.
2. Press ↓ to select YEAR.
3. Press ENTER.
4. Use ↑ or ↓ to set the year.
5. Press ENTER.
6. Repeat steps 1 to 5 for:
o
MONTH
o
DAY
o
HOUR
o
MINUTE
Brightness
You can set the brightness as follows:
1. On the remote, press FUNCT.
2. Press ↓ to select BRIGHTNESS.
3. Press ENTER.
4. Use ↑ or ↓ to set the brightness.
5. Press ENTER.
Key Sound
You can turn key sounds on or off as follows:
1. On the remote, press FUNCT.
2. Press ↓ to select KEY SOUND.
3. Press ENTER.
4. Use ↑ or ↓ to select YES OR NO.
5. Press ENTER.
Resetting the device
1. On the remote, press FUNCT.
2. Press ↓ to select CLEAR ALL.
3. Press ENTER.
4. Use ↑ or ↓ to select YES OR NO.