8 navigate to a location stored in a picture – Alpine INA-W910R User Manual
Page 47
INA-W910R Navigation Software Owner’s Manual
47
6.
When finished, tap
.
7.
A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
) appears at the
new location. Tap
to confirm the destination, or tap
to select a different destination.
8.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
parameters, or tap
and start your journey.
3.1.8 Navigate to a location stored in a picture
You can also set the location stored in a picture as your destination. Do as follows:
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap
.
3.
Open the
menu and tap
.
4.
The list of picutres stored in the device appears. Select one picture from the list.
5.
A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
) appears at the
new location. Tap
to confirm the destination, or tap
to select a different destination.
6.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
parameters, or tap
and start your journey.