Alpine INA-W910R - Manual (Page 69)

INA-W910R Navigation Software Owner’s Manual 69
The application can warn you when you approach road safety cameras
like speed cameras or dangerous areas like school zones or railroad
crossings. Tap this button and set the different alert types individually.
The following alert types are available:
•
Audio warning: beeps or the name of the alert type can be
played while you are approaching the camera, or extra alert
sounds if you exceed the speed limit while approaching one of
these cameras.
•
Visual warning: the type of the alert point, its distance and the
related speed limit appear on the Map screen while you are
approaching one of these cameras.
For some of the alert points, the enforced or expected speed limit is
available. For these points, the audio alert can be different if you are
below or above the given speed limit.
•
Only when speeding: The audio alert is only played when you
exceed the given speed limit.
•
When approaching: The audio alert is always played. In order to
draw your attention, the alert can be different if you exceed the
speed limit.
Road safety cameras are not displayed in the list when GPS position is
not available or if you are in certain countries where road safety
camera warning is prohibited.
Maps may contain driver alert information. Tap this button to turn on or
off these warnings and to set the distance from the hazard to receive
the warning at. These can be set individually for the different warning
types.
You can control the volume of the following sound types:
Button Description
This is the main volume control. These controls affect all below
sounds. They can also be accessed from the Quick menu.
These controls affect the volume of the guidance sounds (verbal
instructions).
These controls affect the volume of the alert sounds (beeps).
Key sounds provide audible confirmation of either pressing hardware
buttons or tapping the touch screen. These controls affect key sounds.