Alpine INA-W910R - Manual (Page 70)

INA-W910R Navigation Software Owner’s Manual 70
Controls for each sound type:
Button Description
Volume slider
Adjusts the volume of the related sound.
Use the switch to mute the related sound. The slider becomes inactive.
Tap again to re-enable.
4.3.2 Customise Quick menu
The content of the Quick menu is fully customisable. Tap the button you want to change, and
select its new function from the list.
4.3.3 Traffic settings
The recommended route is not always the same between two points. Whenever suitable data
exists, traffic information can be taken into account in the route calculation.
Button Description
Use this switch to enable or disable historical traffic data and traffic
patterns. This locally stored information can be very useful in normal
circumstances but for example on public holidays it may be better to
turn off in order not to take into account normal weekday traffic jams.
Use this switch to enable or disable the TMC receiver that can receive
real-time traffic information. The rest of the buttons below are all
related to the TMC function and are available only if the receiver is
enabled.
This setting determines how your software uses the received real-
time traffic information in route calculation. When calculating a new
route, or when recalculation becomes necessary based on the
received Traffic events, your software avoids traffic events if it makes
sense.
You can also set the minimum delay that triggers route recalculation,
and you can instruct the application if you want to confirm every
recalculation.
Tap this button to open the list of traffic event types, and select which
events to take into account in route calculation.