Creating recovery discs – PACKARD BELL dot s series User Manual

Page 80

Advertising
background image

78 - Recovery

Creating recovery discs

To reinstall using discs, you must create a set of recovery discs
beforehand. Throughout the process, you will be guided by on-screen
instructions. Please read them carefully!

Caution: If you are using a USB flash drive, ensure it is at least
12 GB and does not contain any previous data.

1. Click on Start

>

All Programs > Packard Bell, then click on

Packard Bell Recovery Management.

2. To create recovery backup for the hard drive’s entire original contents,

including Windows and all factory-loaded software and drivers, click
Create Factory Default Disc, or if your computer has no optical drive,
Create Factory Default Backup.

- OR -

Advertising
This manual is related to the following products: