PACKARD BELL dot s series User Manual

Page 90

Advertising
background image

88 - Recovery

3. Press the down key until F12 Boot Menu is selected, press F5 to

change this setting to Enabled.

4. Use the left or right arrow keys to select the Exit menu.
5. Select Save Changes and Exit and press Enter. Select OK to

confirm.

6. Your computer will restart.

3. During startup, press F12 to open the boot menu. The boot menu allows

you to select which device to start from, such as the hard drive or an
optical disc.

4. Use your arrow keys to select the line CDROM/DVD or USB HDD, then

press Enter. Windows installs from the recovery backup instead of the
normal startup process.

5. Follow the on-screen prompts to complete the recovery.

Advertising
This manual is related to the following products: