Banks Power DynaFact pillar-style gauge mount '03-05 Dodge 5.9L Cummins Truck - Manual (Page 2)

2
96519 v.2.0
Dear Customer,
If you have any questions
concerning the installation of
your Banks DynaFact
® Pillar-Style
Gauge Mount, please call our
Technical Service Hotline at
(888) 839-2700 between 7:00 am
and 5:00 pm (PT). If you have any
questions relating to shipping or
billing, please contact our
Customer Service Department at
(888) 839-5600.
Thank you.
WARNING: DO NOT INSTALL THIS
BANKS DYNAFACT PILLAR-STYLE
GAUGE MOUNT ONTO A VEHICLE
THAT HAS SIDE AIR BAGS LOCATED
IN THE A-PILLAR. SEVERE INJURY
WILL RESULT.
1.
For ease of installation of your
Banks DynaFact gauge mount
familiarize yourself with the
procedures by reading the entire
manual before starting work. This
instruction manual contains 8 pages of
text, and illustration.
2.
Route and tie wires and hoses a
minimum of 6 inches away from heat
source, moving parts and sharp edges.
Clearance of 8 inches or more is
recommended where possible.
Tools Required:
• 3 ⁄
8
" socket, extension and driver
• 5 ⁄
32
" hex key
• Medium grit sand paper
• Hacksaw or handsaw
General Installation Practices