Banks Power Interface- Banks iQ 2.0 1996 & Later Vehicles with OBDII Diagnostics - Manual (Page 19)

97273 v.2.0
19
Figure 12
Figure 13 Honda Motor CO. Emission Label Shown
‘Engine Displacement’ screen to enter an
accurate displacement for your engine.
Engine displacement can be found on
the Under Hood Emissions Label. See
Figure 13.
Fuel Offset
Each vehicle may have some variation in
the calculated fuel usage. A fine tuning
adjustment may be applied using the
Fuel Offset utility. This value may be
determined by comparing actual fuel
used during a drive cycle to the value
that the iQ reports for fuel used. Enter
the ‘Fuel Offset’ screen and tap on the
‘ACTUAL Fuel Used’ box on the left side
of the screen. See Figure 14. Use the
keypad on the right side of the screen to
input a value. Press ‘DONE’ when your
entry is complete. Alternatively, you may
calculate a percentage offset yourself
and input the value in the percentage
offset box on the right side of the
screen. Tap the ‘Percentage Offset’ box
on the right side and use the keypad to
enter a value.
Gauges
There are five (5) gauges displayed in
the Economy Mode. See Figure 15. The
three (3) to the left of the screen can
be changed to display the data from a
list of available parameters. The two (2)
on the right, Instant MPG and Average
MPG, can be changed only to increase
or decrease the scale display. Refer to
‘Gauge Placement’ in selection 17 to
change the Gauges displayed.