Banks Power Interface- Banks iQ 2.0 1996 & Later Vehicles with OBDII Diagnostics - Manual (Page 21)

97273 v.2.0
21
Figure 16
Trip
The Trip feature will keep track of your
vehicles Average Speed, Trip Distance,
Trip Time, Engine On Time, Cost per Trip,
Fuel Used, MPH, Instant MPG, & Average
MPG. You can switch between two (2)
Trip recordings, ‘Trip A’ and ‘Trip B’, by
pressing the letter on the lower right
corner of the Economy Mode screen.
See Figure 15. You can view all this
information by pressing on the wrench
icon in the lower left corner of your
screen. In the ‘Options’ menu press on
the Trip information you wish to view.
Once you have viewed the information,
press the return icon to return to the
Options menu or press the iQ icon to
return to the Economy Mode.
Reset Trip Information
The Trip information data can be reset
by pressing and holding the letter of the
trip you wish to clear for 5 seconds on
the lower right corner of the Economy
Mode screen. You may also reset the
trip information by going to the trip data
screen for each screen and press the
‘Reset’ button on the lower right corner.
See Figure 16.
Trip A has the option to reset
automatically. All the data captured will
be reset to zero after the engine has
been off for more than two (2) hours. To
enable this option press on the wrench
icon in the lower left hand side of the
screen of the Economy Mode screen.
In the ‘Options’ menu press on the
‘Trip A’ tab. In the lower part of the Trip
A screen press ‘Auto’ to have the iQ
automatically reset the trip information
or press ‘Manual’ to manually reset the
information. See Figure 16. Press the
‘Return’ icon to return to the ‘Options’
menu or press the ‘iQ’ icon to return to
the Economy Mode.
-END, SECTION 6-