Banks Power Interface- Banks iQ 2.0 1996 & Later Vehicles with OBDII Diagnostics - Manual (Page 23)

97273 v.2.0
23
Figure 19 Performance Test Results
7.
When the performance test is
finished, Banks iQ immediately displays
a results screen showing elapsed time/
speed/distance measurements along
with default gauge readings for the
run. See Figure 19. Each completed
Performance Test is saved for future
analysis. Exit the result screen and return
to the Performance Mode by pressing
the ‘X’ in the upper right-hand corner.
Viewing Saved Performance Tests
8.
To view a previously completed
Performance Test touch the button
labeled ‘Recall Saved’.
9.
Use the Up and Down arrow buttons
to highlight the Performance Test you
want to review.
NOTE: All tests are date and time
stamped to conveniently help search for
the desired Test run.
10.
Touch the button labeled ‘Review
Test’ to view in detail the results of the
saved Performance Test.
Use the ‘Left’ and ‘Right’ arrow buttons
to move the cursor one frame at a time
in the displayed graph area. Moving
between the frames will automatically
update the displayed parameter values.
NOTE: Use of this feature will be
suspended while the vehicle is in motion.
Only when the Banks iQ senses that the
vehicle’s speed is zero can you review
your saved tests.
Deleting Saved Performance Tests
11.
To delete a previously saved
Performance Test, highlight the saved
test you wish to delete and Press the
‘Delete’ Button
12.
A pop up window labeled ‘Confirm
Delete’ will ask you to confirm the
deletion of the test.
13.
Press the button labeled ‘Yes’ to
confirm or ‘No’ to decline.
14.
Press the Banks Home iQ icon to
return to the ‘Mode Select’ menu.
-END, SECTION 7-