Banks Power GM Motorhomes: (Gas ’01 - 10 8.1L Workhorse) Intake- Ram-Air Intake system '01-08 Class-A MH - Manual (Page 12)

clamp (Item 2) connecting the Banks
Ram-Air intake tube and intake elbow.
Loosely assemble another hose clamp
on the outlet side of the intake elbow.
See Figure 13.
16.
From under the right wheel well
install the intake elbow and Banks
Ram-Air intake tube. Install the parts
loosely and only snug the hose clamps
once correct alignment is attained.
Figure 12
Figure 11
12
96430 v.4.0