Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1391 - Manual (Page 27)

27
Maintenance
PNEG-1391 8",10", & 12" BE-SAW Augers
1. LUBRICATION GUIDELINES
A. Check and service the auger frequently to
ensure economical and efficient operation of
your auger. Maintaining regular and correct
lubrication is key to proper maintenance. In-
frequent or incorrect lubrication can result in
reduced efficiency, excessive wear, and need-
less downtime.
B. Refer to the drawing below to identify the parts
that need lubrication and the lubrication
frequency.
NEVER perform maintenance on the
auger unless all safety shields and
devices are in place. Replace any
that are damaged or lost. Do not
clean, adjust, or lubricate any part of
a machine that is in operation.
FIGURE 7
Flexible Swing-Out Hopper U-Joints:
Lubricate 10 Hour Intervals
Lubrication Locations