Usb/sd card operation, X2dma400 operation – Dual Electronics X2DMA400 User Manual

Page 18

Advertising
background image

18

X2DMA400

 OPERATION

To play MP3/WMA files from most mass storage

devices,connect a device to the X2DMA400's USB port.

To play MP3/WMA files from an SD Card, insert an SD card

into the X2DMA400's SD card slot with the label facing up,

and press the card until it clicks into place. Remove the SD

card by pressing in until it clicks, then pull to remove.

When a USB or SD card device is first connected, playback

will begin momentarily. Depending on the number of files

and folders, it may take several seconds for the device to

begin playing. If no valid MP3/WMA files are detected, “NO

FILE” will be displayed.

Rotate tuning knob right to skip to the beginning of the next

track. Rotate tuning knob left to return to the beginning of

the current track. Rotate tuning knob left again to skip to the

beginning of the previous track.

Press and hold TRACK 

ll

or TRACK

nn

to fast forward

or reverse a track.

Press

l

/

II to temporarily stop USB playback.

Press

l

/

II again to resume playback.

Press

to select the previous folder.

Press

to select the next folder.

Note: Folder access is only available on USB/SD Card

devices with more than one folder.

Press RPT to enter the Repeat menu, then turn the tuning 

knob to select one of the following options:

• ALL - Plays all tracks on the USB/SD Card device.

• ONE - Continuously repeats selected track.

• FOLDER - Continuously repeats all files in selected folder.

Press RDM to enter the Random menu, then turn the tuning 

knob to select one of the following options:

• OFF - Cancels the RDM function.

• ALL - Plays all tracks in random order.

• FOLDER - Plays all tracks in folder in random order.

Note: Random mode is retained in memory when selecting

between other modes and when the unit is turned on/off.

Press INT to enter the Intro menu, then turn the tuning knob

to select one of the following options:

• OFF - Cancels the INT function.

• ALL - Plays first 10 seconds of each track.

• FOLDER - Plays first 10 seconds of each track in folder.

Connecting a USB Device

(sold separately)

Connecting a SD Card

(sold separately)

Playing Music

Track Select

Fast Forward and Reverse

Pause

Folder Access 

Repeat

Random

Intro

USB/SD Card Operation

Advertising