Dual Electronics X2DMA400 - Manual (Page 7)

7
X2DMA400 OPERATION
Auxiliary Input
Volume
Mute
Reset
Display
Set the Clock
12/24-Hour Clock
General Operation
Insert 3.5 mm plug to connect your portable audio device.
Adjust volume using volume knob (00-46).
Press MUTE to silence the audio.
Press MUTE again to cancel.
Press the RESET button, located in the bottom left corner of
the front panel, to reset the unit back to the factory settings
if abnormal operation occurs.
Press DISP to toggle between items such as clock, radio
frequency, or ID3 tag song information.
With the unit on, press and hold DISP until the clock begins
to flash, then release.
• Turn the tuning knob left to adjust the hours
• Turn the tuning knob right to adjust the minutes.
Press DISP momentarily to save the selected time.
The clock will display 12-hour AM/PM time in USA
frequency spacing mode (PM 10:00). In European frequency
spacing mode, the clock will display 24-hour time (22:00).