Audio menu, X2dma400 operation – Dual Electronics X2DMA400 User Manual

Page 9

Advertising
background image

9

X2DMA400

 OPERATION

Audio Menu

Press AUDIO/MENU until BASS appears, then rotate the

tuning knob left/right to adjust (-6 minimum / +6 maximum).

Press AUDIO/MENU until TREBLE appears, then rotate the

tuning knob left/right to adjust (-6 minimum / +6 maximum).

Note: Bass and Treble settings are retained for each mode

individually.

Press AUDIO/MENU until BALANCE appears, then rotate

the tuning knob left/right to adjust (BALANCE LEFT 12 to

BALANCE RIGHT 12). "BALANCE EVEN" represents equal

balance.

Press AUDIO/MENU until FADER appears, then rotate the

tuning knob left/right to adjust (FADER FRONT 12 to FADER

REAR 12). "FADER EVEN" represents equal fader.

Press AUDIO/MENU until EQ appears. Rotate the tuning 

knob left/right to select between FLAT (default), POP, JAZZ,

CLASSIC, BEAT, ROCK and USER equalization curves. Press

SELECT to confirm. Any manual adjustment to the Bass or

Treble settings are automatically saved as USER.

Press AUDIO/MENU until SUBWFR appears, then press

SELECT to confirm. Rotate the tuning knob left/right to adjust

(0-12). Adjusting the level to 0 turns the subwoofer off.

* Note: 

Subwoofer option will not appear if the "Subwoofer"

option in the setup menu is set to REAR. Refer to page 8 for

details.

The source volume level control allows a gain adjustment

for each audio source. Set the source volume level for each

mode, depending on the relative volume of each audio source.

To set the source volume level, press AUDIO/MENU until

"SOURCE LEVEL" appears. After one second, the current

mode will appear on the display. Turn the tuning knob to

adjust the audio level of the current source (-6 minimum/+6

maximum).

Note: Only the current mode will be available for adjustment.

Change to another mode to set the source level for that mode.

Bass

Treble

Balance

Fader

EQ

*Subwoofer

Source Volume Level

Press AUDIO/MENU momentarily to cycle between Bass, Treble, Balance, Fader,

Equalizer, *Subwoofer, and Source Volume Level. Press BACK at any time to exit the

audio menu.

BASS TREBLE BALANCE FADER EQ SUBWOOFER SOURCE LEVEL

Advertising