Dual Electronics X2DMA400 - Manual (Page 6)

6
X2DMA400 OPERATION
Power On/Off
Source
Available Modes
Steering Wheel Interface
Input
General Operation
Press or any other button to turn unit on. Press and hold
to turn unit off.
Press SOURCE to select one of the following audio sources:
AM/FM Tuner Mode
CD Player Mode
Auxiliary Input (front/rear) Modes
USB and Operation of iPod/iPhone Modes
SD Card Mode
SiriusXM Satellite Radio Mode
When a source is selected, a red line will appear
underneath the corresponding icon in the source indicator
bar beneath the LCD.
SiriusXM mode will not appear unless the SiriusXM Connect
Vehicle Tuner (sold separately) is connected.
Operation of iPod mode will not appear unless an iPod
device (sold separately) has been connected.
CD, USB and SD modes will not appear unless a CD, USB
device or SD card (sold separately) have been connected.
The steering wheel interface input located on the back of the
head unit allows connection to the PAC (Pacific Accessory
Corporation) SWI-PS interface module (sold separately).
Visit www.pac-audio.com for details.
To configure steering wheel controls, follow the instructions
provided with the PAC SWI-PS interface module. After
installing the interface module, insert the module's 3.5mm
jack into the port on the back of the head unit.