PowerWalker WinPower Software V.4.3.0.1 Quick Guide - Manual (Page 8)

9-1. Refer to the left setting, it means that the backup time of the UPS in USB is 10 minutes.
9-2. When the UPS of the Agent transfer to battery mode for 2 minutes, the Agent will send out the
shutdown command to 192.168.1.2 & 192.168.1.3.
9-3. When the UPS of the Agent transfer to battery mode for 5 minutes, the Agent will send out the
shutdown command to 192.168.1.5
9-4 When the UPS of the Agent is going to shutdown (10 minutes on this sample), the Agent will send
out the shutdown command to 192.168.1.8
10. In Remote sides (PC-A, PC-B…), You have to enable the icon of “ Remote Shutdown by Agent” at
first. Click “Add” button in the “Shutdown Options”, enter IP address of the Agent in the pop up
dialog. Press the “OK” button to finish the setting. After this, When the local Agent received the
specified agent's shutdown signal, system can be shutdown in delay time. If you don’t enter the IP
address of the Agent, the remote PC would not implement the shutdown procedure after it
receives the shutdown command from the Agent.