Prokit's Industries MT-1620 - Manual (Page 34)

overrange condition.
 For measuring resistance above 1M, the meter
may take a few seconds to get stable
reading.
4.14 CAPACITANCE MEASURING
WARNING
To avoid electric shock, be sure the
capacitors have been discharged fully
before measuring the capacitance of a
capacitor.
4.14.1 Connect the black test lead to the COM jack
and the red test lead to the jack.
4.14.2 Set the transform switch at the 
range position.
4.14.3 put down the "FUNC." transformed at
measurement.
4.14.4 Before connect test leads across two sides
of the capacitor under measurement, be
sure that the capacitor has been discharged
fully.
4.14.5 You can get reading from LCD.
NOTE:
 It takes certain time (200μF range 30 seconds) to
- 33-