R&M Materials Handling VARIABLE SPEED CONTROLS ControlMaster Elite Manual - Manual (Page 17)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
!
: (937) 328-5100
FAX: (937) 325-5319
17/31
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
3.1.1 Navigation on the control keypad
READY STOP
G3.
Parameters
G1 $ G7 $
READY STOP
G4.
Monitoring
G1 $ G21 $
READY STOP
G5.
Panel Control
B1 $ R2 $
READY STOP
M6.
System Menu
S1 $ S8 $
READY STOP
M7.
Active Faults
F0
READY STOP
M8.
Fault History
H1 $ Hxx $
READY STOP
G3.4.
Motor Parameters
G1 $ G7 $
READY STOP
G3.4.1.
Motor Set 1
P1 $ G22 $
READY STOP
P3.4.1.1.
Motor Nom Volt
400 V
READY STOP
V4.20.
Output Frequency
0.00 Hz
READY STOP
B5.1.
Panel Control
Off
READY STOP
S6.2.
Application
Crane
READY STOP
H8.1.
57 Thermistor
F T1 $ T13 $
READY STOP
Operation days
0
I/O term I/O term I/O term
I/O term
I/O term I/O term
I/O term I/O term
I/O term I/O term
I/O term I/O term I/O term I/O term
T8.1.1.
3.1.2 Value line editing
enter
Mode
change Accept
value Edit
value READY STOP
P3.4.1.1.
Motor Nom Volt
400 V
I/O term
Warning! Changing parameter settings during running may cause a hazardous situation.
Parameter settings must not be changed during running.
3.1.3 Passwords
Parameter Name Description
Following passwords release the parameter locks.
Level 1 Locked
0
Level 2 Start-up 26
P3.1.1 Password
Level 3 Engineering 768