R&M Materials Handling VARIABLE SPEED CONTROLS ControlMaster Elite Manual - Manual (Page 2)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
!
: (937) 328-5100
FAX: (937) 325-5319
2/31
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
EN
!
Read the instructions supplied with the hoist before installation and commissioning.
#
Keep the instructions in a safe place for future reference.
Table of content
1 GENERAL....................................................... 4
1.1 Technical
data ............................................ 4
1.2 Type mark coding ....................................... 5
1.3 Basic
description......................................... 6
1.4 Main components ....................................... 7
1.5 Functional description................................. 8
1.6 Control methods ......................................... 9
1.7 Description of the control methods ........... 10
1.8 Mechanical
brake control.......................... 11
1.9 Motor control modes ................................. 12
1.10 EMC.......................................................... 13
1.10.1 Fulfilled EMC-standards ................................13
2 START-UP PROCEDURE ............................ 14
2.1 Visual
checks............................................ 14
2.2 Checks before the first test run................. 14
2.3 Test run without load ................................ 15
2.4 Test run with load ..................................... 15
2.5 After the test run ....................................... 15
3 PARAMETER ADJUSTMENTS.................... 16
3.1 Control keypad operation.......................... 16
3.1.1 Navigation on the control keypad ..................17
3.1.2 Value line editing............................................17
3.1.3 Passwords .....................................................17
3.1.4 Monitoring ......................................................18
3.2 Parameter groups ..................................... 19
4 COMPONENTS............................................. 20
4.1 Spare parts for D2H.................................. 20
4.2 Spare parts for D2C.................................. 21
5 FAULT CODES............................................. 22
5.1 Fault time data record............................... 26
5.2 Fault
Counter ............................................ 26
6 SERVICE....................................................... 27
7 LAYOUTS, DIMENSIONS AND WEIGHTS .. 27