R&M Materials Handling ELECTRIC CHAIN HOISTS LoadMate Chain Hoist LM 16-20-25 - Manual (Page 38)

LM16-20-25 I&M MANUAL/EN/11.30.2010
38/73
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
6.14 Hook Inspection
The wear on the top hook and the load hook shall be checked routinely. Measure the throat opening
(dimension
a2). If the throat opening exceeds the maximum opening allowed (1.15 x a2), replace the hook.
Damaged safety latches shall be replaced immediately.
Maximum throat opening allowed:
Hook class:
05T 08T 1T 16T Top Hook
Maximum allowed
opening:
1.54”
[39mm] 1.69”
[43mm] 1.81”
[46mm] 2.01”
[51mm] 2.13”
[54mm]